• Thermal Mass Flowmeter Sensyflow Fmt700-P
  • Thermal Mass Flowmeter Sensyflow Fmt700-P
  • Thermal Mass Flowmeter Sensyflow Fmt700-P
  • Thermal Mass Flowmeter Sensyflow Fmt700-P
  • Thermal Mass Flowmeter Sensyflow Fmt700-P
  • Thermal Mass Flowmeter Sensyflow Fmt700-P

Thermal Mass Flowmeter Sensyflow Fmt700-P

Accuracy: ≤ ±0.8 % of Measured Value
Main Application: Air
Size: DN 25 to DN 200
Sensor: Clamp-on/External
Application: Industrial Production
Type: Thermal Mass
Customization:

Contact Supplier

Diamond Member Since 2021

Suppliers with verified business licenses

Manufacturer/Factory
  • Overview
  • Product Description
  • Overview
  • Data
Overview

Basic Info.

Model NO.
FMT700-P
Measuring Media
Air
Measuring Principle
Thermodynamic
Measurement Object
Closed Pipeline
Certification
Dakks/EPA
Transport Package
Original Package
Trademark
ABB
Origin
China
Production Capacity
100000

Product Description

ABB  Thermal mass flowmeterSensyflow FMT700-P
 

Product Description

Sensyflow FMT700-P is for direct mass flow measurement of air. The measurement is independent of operating pressure and temperature. It supplies best accuracy together with an unrivalled response time. Used in quality assurance, test bench applications, research and development.
It is the reference system for intake air measurement of the leading car manufacturers worldwide
Thermal Mass Flowmeter Sensyflow Fmt700-P
Thermal Mass Flowmeter Sensyflow Fmt700-P

Overview

The measuring system comprises a flowmeter sensor (measuring tube), a measuring section and a supply / evaluation unit. The FMT700-P Compact has an integrated transmitter. 

The sensor is designed as a measuring tube and accommodates the measuring elements. The meter tube is available in six nominal diameters ranging from DN 25 to DN 200 and is installed in the measuring section by using quick-clamping connectors.

The measuring section consists of inlet and outlet sections of the appropriate size and of an air filter or flow conditioner which can be connected - e.g. to an air duct - via the connection piece on the suction side.

The Sensyflow FMT700-P Compact can simultaneously operate one analog output (current 0 / 4 to 20 mA or voltage 0 to 5 / 10 V), one digital output (frequency, pulse, alarm) and a serial RS232 interface.

The supply / evaluation unit is available as a 19" plug-in version or as a desktop unit. It provides the power supply for the sensor and converts its flow-dependent current signal into standard analog mass flow signals. The unit with a 6-digit display is suitable for all measuring tubes and automatically identifies the appropriate nominal diameter. Further diagnostic functions allow simple and safe operation.

Data

  • Direct mass flow measurement of air
    - No additional pressure and temperature compensation required
  • High measuring accuracy over the entire measuring range
    - Measuring accuracy up to < 0.8 % of measured value
  • Wide measuring range of up to 1:60
    - Measurement up to 5000 kg/h
    - DN 25 to DN 200
  • Quick response time < 25 ms
    - Detection of rapid load changes on engine test benches
  • Complete system with inlet / outlet sections, flow conditioner and connection parts
    -  Easy to use
    -  Ready for operation
  • Used in test bench applications, quality assurance, research and development
Thermal Mass Flowmeter Sensyflow Fmt700-P

Send your message to this supplier

*From:
*To:
avatar Ms. Jenny Liu
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now