| Customization: | Available |
|---|---|
| After-sales Service: | Provider |
| Warranty: | 12 Month |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Parameters:
| Brand of Alternator | Stam ford | Containerized | Customized |
| Frequency | 50Hz or 60Hz | Standard Features | Compact and easy to transport |
| Controller/PLC | Smartgen/ Deepsea/ Comap etc | RATED REVOLUTION | 1500 RPM/ 1800RPM |
| Output Type | AC Three Phase | Warranty: | 12 Months |
Fully automatic generator set features
1.High reliability, stable power generation, the power generation usually operates at 90% of the rated power.
2.Strong load adaptability, small fuel consumption rate when the load of the unit changes from 50% to 100%, so the economy is good during peak shifting, and the adaptable range of load changes is large.
3. Intelligent power regulator - real-time adjustment of motor output power according to load changes;
4. Intelligent fault alarm system ---- sound and light alarm prompts when short-circuit or overload occurs.
5.Advanced self-test procedure - can quickly detect whether all hardware circuits are operating normally after switching on.
6. All-digital signal processing technology - with a strong ability to combine functional modules, you can flexibly configure different functions to meet the different needs of customers.
7. A variety of operating modes to choose from------ manual/automatic control mode can be selected.
8. small capacity of a single machine, running operation technology is simple, easy for general personnel to master. Maintenance is simple, easy to maintain, requires few operators, less maintenance during the standby period.
1.Automatic start and input function When the utility grid stops supplying electricity or the utility voltage is lower than 80% of the rated value, the generator set will start automatically, and after the successful start, the switching switch will automatically switch to realise the load power supply, and the starting process will be within 15s, and it has a remote port, so that the starting delay can be set to realise the automatic start of the generator set.
2.Automatic exit function During the self-generation transmission of the generator set in the automatic state, if the utility power is restored and confirmed after 30s, the generator set starts to execute the automatic withdrawal procedure, the generator set will firstly cut off the load, restore the utility power supply, and then automatically shut down the generator set after two minutes of cold running. If the utility power stops supplying power during the cold running period, the unit will automatically adjust the speed and restore power supply to the load.
3.Warning/failure protection function When the battery voltage is low, charging failure, overcurrent, low oil pressure, water temperature and other abnormalities, the device is not shutdown alarm, this time the alarm light flashes (when the value exceeds the limit value is immediately shut down); when the speed is too high or too low, frequency over the limit, voltage over the limit, emergency stops, start-up failure, etc., there is a fault protection function, if a certain analogue input value is greater than the upper limit or lower than the lower limit, the beginning of the corresponding too high/low delay, the delay is not back to normal after the end of the data, then the unit will automatically shut down. If a certain analogue input value is greater than the upper limit or lower than the lower limit, it will start to correspond to the over-high/under-low delay, and if the data is still not back to normal after the end of the delay, then the equipment will shut down immediately, and the alarm light will be on.
4.Automatic charging function During the period of utility power or self-generation, the unit can automatically charge the start-up control battery.
5.Manual function Automatic and manual on the control system panel of the unit, when the system works in the manual state, it can realise the start-up of the unit, high and low speed loading and changing, power supply, shutdown, alarm signal light test alarm lifting the self-generated electricity splitting and closing, utility power closing and other operations. Emergency stop knob is effective in both automatic and manual state. Do not use this button for non-emergency situations.
6.Other Functions Overview Use animated icon type warning, fault display, high brightness, multi-colour LCD display parameters; automatic recording of unit running time, compact and reasonable structure, stable and reliable performance.
ATS switching cabinet function introduction The changeover switches in the ATS cabinet configured by our company for users are all international or domestic famous brands. Automatic power transfer cabinet (hereinafter referred to as ATS is specially designed for the control of switching between utility and unit power supply and load. The advantages of the automatic power transfer switch selected by our company are: simple structure, small volume, many specifications, safe and reliable interlocking, long service life, simple operation, and automation, intelligence and remote control. Automatic switching description Dual power automatic transfer switch is two or more circuit power supply according to the actual situation automatically select and switch to one of the power supply to the load power supply device. The main power components for the switching power supply referred to as ATS, is the abbreviation for Automatic transfer system. Mainly installed in the emergency power supply system, generally used for two-way power switching, by the switch body and control system components. System features: -Optimised selection of components, safe, reliable and convenient maintenance. -Centralised control, simple and convenient operation -High performance and price ratio -Can be operated with load switching, reliable mechanical and electrical interlocking to ensure that only one position is switched on. -Clear position indication on the outside, equipped with movable and detachable manual operation mechanism. -0 arc pulling when switching between rated operating currents.
Container-type generator sets run quietly and are suitable for use in night operations, high-grade residences, offices and other places with high requirements for noise control, and in harsh environments such as construction sites, large buildings, airports, harbours, offshore platforms, mines, deserts and so on, where they are protected from rainwater and dust immersion.
){kind=link}